from __future__ import (
unicode_literals,
print_function,
absolute_import,
division,
)
try:
from itertools import izip as zip
except ImportError:
pass
from time import sleep
from itertools import repeat, cycle, chain
from threading import Lock
from collections import OrderedDict
from .exc import (
DeviceClosed,
GPIOPinMissing,
EnergenieSocketMissing,
EnergenieBadSocket,
OutputDeviceBadValue,
)
from .input_devices import Button
from .output_devices import (
OutputDevice,
LED,
PWMLED,
RGBLED,
Buzzer,
Motor,
)
from .threads import GPIOThread
from .devices import Device, CompositeDevice
from .mixins import SharedMixin, SourceMixin, HoldMixin
[docs]class CompositeOutputDevice(SourceMixin, CompositeDevice):
"""
Extends :class:`CompositeDevice` with :meth:`on`, :meth:`off`, and
:meth:`toggle` methods for controlling subordinate output devices. Also
extends :attr:`value` to be writeable.
:param list _order:
If specified, this is the order of named items specified by keyword
arguments (to ensure that the :attr:`value` tuple is constructed with a
specific order). All keyword arguments *must* be included in the
collection. If omitted, an alphabetically sorted order will be selected
for keyword arguments.
"""
[docs] def on(self):
"""
Turn all the output devices on.
"""
for device in self:
if isinstance(device, (OutputDevice, CompositeOutputDevice)):
device.on()
[docs] def off(self):
"""
Turn all the output devices off.
"""
for device in self:
if isinstance(device, (OutputDevice, CompositeOutputDevice)):
device.off()
[docs] def toggle(self):
"""
Toggle all the output devices. For each device, if it's on, turn it
off; if it's off, turn it on.
"""
for device in self:
if isinstance(device, (OutputDevice, CompositeOutputDevice)):
device.toggle()
@property
def value(self):
"""
A tuple containing a value for each subordinate device. This property
can also be set to update the state of all subordinate output devices.
"""
return super(CompositeOutputDevice, self).value
@value.setter
def value(self, value):
for device, v in zip(self, value):
if isinstance(device, (OutputDevice, CompositeOutputDevice)):
device.value = v
# Simply ignore values for non-output devices
ButtonBoard.is_pressed = ButtonBoard.is_active
ButtonBoard.pressed_time = ButtonBoard.active_time
ButtonBoard.when_pressed = ButtonBoard.when_activated
ButtonBoard.when_released = ButtonBoard.when_deactivated
ButtonBoard.wait_for_press = ButtonBoard.wait_for_active
ButtonBoard.wait_for_release = ButtonBoard.wait_for_inactive
[docs]class LEDCollection(CompositeOutputDevice):
"""
Extends :class:`CompositeOutputDevice`. Abstract base class for
:class:`LEDBoard` and :class:`LEDBarGraph`.
"""
def __init__(self, *args, **kwargs):
self._blink_thread = None
pwm = kwargs.pop('pwm', False)
active_high = kwargs.pop('active_high', True)
initial_value = kwargs.pop('initial_value', False)
order = kwargs.pop('_order', None)
LEDClass = PWMLED if pwm else LED
super(LEDCollection, self).__init__(
*(
pin_or_collection
if isinstance(pin_or_collection, LEDCollection) else
LEDClass(pin_or_collection, active_high, initial_value)
for pin_or_collection in args
),
_order=order,
**{
name: pin_or_collection
if isinstance(pin_or_collection, LEDCollection) else
LEDClass(pin_or_collection, active_high, initial_value)
for name, pin_or_collection in kwargs.items()
})
leds = []
for item in self:
if isinstance(item, LEDCollection):
for subitem in item.leds:
leds.append(subitem)
else:
leds.append(item)
self._leds = tuple(leds)
@property
def leds(self):
"""
A flat tuple of all LEDs contained in this collection (and all
sub-collections).
"""
return self._leds
@property
def active_high(self):
return self[0].active_high
[docs]class LEDBoard(LEDCollection):
"""
Extends :class:`LEDCollection` and represents a generic LED board or
collection of LEDs.
The following example turns on all the LEDs on a board containing 5 LEDs
attached to GPIO pins 2 through 6::
from gpiozero import LEDBoard
leds = LEDBoard(2, 3, 4, 5, 6)
leds.on()
:param int \*pins:
Specify the GPIO pins that the LEDs of the board are attached to. You
can designate as many pins as necessary. You can also specify
:class:`LEDBoard` instances to create trees of LEDs.
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances for each pin. If
``False`` (the default), construct regular :class:`LED` instances. This
parameter can only be specified as a keyword parameter.
:param bool active_high:
If ``True`` (the default), the :meth:`on` method will set all the
associated pins to HIGH. If ``False``, the :meth:`on` method will set
all pins to LOW (the :meth:`off` method always does the opposite). This
parameter can only be specified as a keyword parameter.
:param bool initial_value:
If ``False`` (the default), all LEDs will be off initially. If
``None``, each device will be left in whatever state the pin is found
in when configured for output (warning: this can be on). If ``True``,
the device will be switched on initially. This parameter can only be
specified as a keyword parameter.
:param \*\*named_pins:
Specify GPIO pins that LEDs of the board are attached to, associating
each LED with a property name. You can designate as many pins as
necessary and use any names, provided they're not already in use by
something else. You can also specify :class:`LEDBoard` instances to
create trees of LEDs.
"""
def __init__(self, *args, **kwargs):
self._blink_leds = []
self._blink_lock = Lock()
super(LEDBoard, self).__init__(*args, **kwargs)
[docs] def close(self):
self._stop_blink()
super(LEDBoard, self).close()
[docs] def on(self, *args):
self._stop_blink()
if args:
for index in args:
self[index].on()
else:
super(LEDBoard, self).on()
[docs] def off(self, *args):
self._stop_blink()
if args:
for index in args:
self[index].off()
else:
super(LEDBoard, self).off()
[docs] def toggle(self, *args):
self._stop_blink()
if args:
for index in args:
self[index].toggle()
else:
super(LEDBoard, self).toggle()
[docs] def blink(
self, on_time=1, off_time=1, fade_in_time=0, fade_out_time=0,
n=None, background=True):
"""
Make all the LEDs turn on and off repeatedly.
:param float on_time:
Number of seconds on. Defaults to 1 second.
:param float off_time:
Number of seconds off. Defaults to 1 second.
:param float fade_in_time:
Number of seconds to spend fading in. Defaults to 0. Must be 0 if
``pwm`` was ``False`` when the class was constructed
(:exc:`ValueError` will be raised if not).
:param float fade_out_time:
Number of seconds to spend fading out. Defaults to 0. Must be 0 if
``pwm`` was ``False`` when the class was constructed
(:exc:`ValueError` will be raised if not).
:param int n:
Number of times to blink; ``None`` (the default) means forever.
:param bool background:
If ``True``, start a background thread to continue blinking and
return immediately. If ``False``, only return when the blink is
finished (warning: the default value of *n* will result in this
method never returning).
"""
for led in self.leds:
if isinstance(led, LED):
if fade_in_time:
raise ValueError('fade_in_time must be 0 with non-PWM LEDs')
if fade_out_time:
raise ValueError('fade_out_time must be 0 with non-PWM LEDs')
self._stop_blink()
self._blink_thread = GPIOThread(
target=self._blink_device,
args=(on_time, off_time, fade_in_time, fade_out_time, n)
)
self._blink_thread.start()
if not background:
self._blink_thread.join()
self._blink_thread = None
def _stop_blink(self, led=None):
if led is None:
if self._blink_thread:
self._blink_thread.stop()
self._blink_thread = None
else:
with self._blink_lock:
self._blink_leds.remove(led)
[docs] def pulse(self, fade_in_time=1, fade_out_time=1, n=None, background=True):
"""
Make the device fade in and out repeatedly.
:param float fade_in_time:
Number of seconds to spend fading in. Defaults to 1.
:param float fade_out_time:
Number of seconds to spend fading out. Defaults to 1.
:param int n:
Number of times to blink; ``None`` (the default) means forever.
:param bool background:
If ``True`` (the default), start a background thread to continue
blinking and return immediately. If ``False``, only return when the
blink is finished (warning: the default value of *n* will result in
this method never returning).
"""
on_time = off_time = 0
self.blink(
on_time, off_time, fade_in_time, fade_out_time, n, background
)
def _blink_device(self, on_time, off_time, fade_in_time, fade_out_time, n, fps=25):
sequence = []
if fade_in_time > 0:
sequence += [
(i * (1 / fps) / fade_in_time, 1 / fps)
for i in range(int(fps * fade_in_time))
]
sequence.append((1, on_time))
if fade_out_time > 0:
sequence += [
(1 - (i * (1 / fps) / fade_out_time), 1 / fps)
for i in range(int(fps * fade_out_time))
]
sequence.append((0, off_time))
sequence = (
cycle(sequence) if n is None else
chain.from_iterable(repeat(sequence, n))
)
with self._blink_lock:
self._blink_leds = list(self.leds)
for led in self._blink_leds:
if led._controller not in (None, self):
led._controller._stop_blink(led)
led._controller = self
for value, delay in sequence:
with self._blink_lock:
if not self._blink_leds:
break
for led in self._blink_leds:
led._write(value)
if self._blink_thread.stopping.wait(delay):
break
[docs]class LEDBarGraph(LEDCollection):
"""
Extends :class:`LEDCollection` to control a line of LEDs representing a
bar graph. Positive values (0 to 1) light the LEDs from first to last.
Negative values (-1 to 0) light the LEDs from last to first.
The following example demonstrates turning on the first two and last two
LEDs in a board containing five LEDs attached to GPIOs 2 through 6::
from gpiozero import LEDBarGraph
from time import sleep
graph = LEDBarGraph(2, 3, 4, 5, 6)
graph.value = 2/5 # Light the first two LEDs only
sleep(1)
graph.value = -2/5 # Light the last two LEDs only
sleep(1)
graph.off()
As with other output devices, :attr:`source` and :attr:`values` are
supported::
from gpiozero import LEDBarGraph, MCP3008
from signal import pause
graph = LEDBarGraph(2, 3, 4, 5, 6, pwm=True)
pot = MCP3008(channel=0)
graph.source = pot.values
pause()
:param int \*pins:
Specify the GPIO pins that the LEDs of the bar graph are attached to.
You can designate as many pins as necessary.
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances for each pin. If
``False`` (the default), construct regular :class:`LED` instances. This
parameter can only be specified as a keyword parameter.
:param bool active_high:
If ``True`` (the default), the :meth:`on` method will set all the
associated pins to HIGH. If ``False``, the :meth:`on` method will set
all pins to LOW (the :meth:`off` method always does the opposite). This
parameter can only be specified as a keyword parameter.
:param float initial_value:
The initial :attr:`value` of the graph given as a float between -1 and
+1. Defaults to ``0.0``. This parameter can only be specified as a
keyword parameter.
"""
def __init__(self, *pins, **kwargs):
# Don't allow graphs to contain collections
for pin in pins:
assert not isinstance(pin, LEDCollection)
pwm = kwargs.pop('pwm', False)
active_high = kwargs.pop('active_high', True)
initial_value = kwargs.pop('initial_value', 0.0)
if kwargs:
raise TypeError('unexpected keyword argument: %s' % kwargs.popitem()[0])
super(LEDBarGraph, self).__init__(*pins, pwm=pwm, active_high=active_high)
try:
self.value = initial_value
except:
self.close()
raise
@property
def value(self):
"""
The value of the LED bar graph. When no LEDs are lit, the value is 0.
When all LEDs are lit, the value is 1. Values between 0 and 1
light LEDs linearly from first to last. Values between 0 and -1
light LEDs linearly from last to first.
To light a particular number of LEDs, simply divide that number by
the number of LEDs. For example, if your graph contains 3 LEDs, the
following will light the first::
from gpiozero import LEDBarGraph
graph = LEDBarGraph(12, 16, 19)
graph.value = 1/3
.. note::
Setting value to -1 will light all LEDs. However, querying it
subsequently will return 1 as both representations are the same in
hardware. The readable range of :attr:`value` is effectively
-1 < value <= 1.
"""
result = sum(led.value for led in self)
if self[0].value < self[-1].value:
result = -result
return result / len(self)
@value.setter
def value(self, value):
if not -1 <= value <= 1:
raise OutputDeviceBadValue('LEDBarGraph value must be between -1 and 1')
count = len(self)
leds = self
if value < 0:
leds = reversed(leds)
value = -value
if isinstance(self[0], PWMLED):
calc_value = lambda index: min(1, max(0, count * value - index))
else:
calc_value = lambda index: value >= ((index + 1) / count)
for index, led in enumerate(leds):
led.value = calc_value(index)
[docs]class LedBorg(RGBLED):
"""
Extends :class:`RGBLED` for the `PiBorg LedBorg`_: an add-on board
containing a very bright RGB LED.
The LedBorg pins are fixed and therefore there's no need to specify them
when constructing this class. The following example turns the LedBorg
purple::
from gpiozero import LedBorg
led = LedBorg()
led.color = (1, 0, 1)
:param tuple initial_value:
The initial color for the LedBorg. Defaults to black ``(0, 0, 0)``.
:param bool pwm:
If ``True`` (the default), construct :class:`PWMLED` instances for
each component of the LedBorg. If ``False``, construct regular
:class:`LED` instances, which prevents smooth color graduations.
.. _PiBorg LedBorg: https://www.piborg.org/ledborg
"""
def __init__(self, initial_value=(0, 0, 0), pwm=True):
super(LedBorg, self).__init__(red=17, green=27, blue=22,
pwm=pwm, initial_value=initial_value)
[docs]class PiLiter(LEDBoard):
"""
Extends :class:`LEDBoard` for the `Ciseco Pi-LITEr`_: a strip of 8 very bright
LEDs.
The Pi-LITEr pins are fixed and therefore there's no need to specify them
when constructing this class. The following example turns on all the LEDs
of the Pi-LITEr::
from gpiozero import PiLiter
lite = PiLiter()
lite.on()
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances for each pin. If
``False`` (the default), construct regular :class:`LED` instances.
:param bool initial_value:
If ``False`` (the default), all LEDs will be off initially. If
``None``, each device will be left in whatever state the pin is found
in when configured for output (warning: this can be on). If ``True``,
the device will be switched on initially.
.. _Ciseco Pi-LITEr: http://shop.ciseco.co.uk/pi-liter-8-led-strip-for-the-raspberry-pi/
"""
def __init__(self, pwm=False, initial_value=False):
super(PiLiter, self).__init__(4, 17, 27, 18, 22, 23, 24, 25,
pwm=pwm, initial_value=initial_value)
[docs]class PiLiterBarGraph(LEDBarGraph):
"""
Extends :class:`LEDBarGraph` to treat the `Ciseco Pi-LITEr`_ as an
8-segment bar graph.
The Pi-LITEr pins are fixed and therefore there's no need to specify them
when constructing this class. The following example sets the graph value
to 0.5::
from gpiozero import PiLiterBarGraph
graph = PiLiterBarGraph()
graph.value = 0.5
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances for each pin. If
``False`` (the default), construct regular :class:`LED` instances.
:param float initial_value:
The initial :attr:`value` of the graph given as a float between -1 and
+1. Defaults to ``0.0``.
.. _Ciseco Pi-LITEr: http://shop.ciseco.co.uk/pi-liter-8-led-strip-for-the-raspberry-pi/
"""
def __init__(self, pwm=False, initial_value=0.0):
pins = (4, 17, 27, 18, 22, 23, 24, 25)
super(PiLiterBarGraph, self).__init__(*pins,
pwm=pwm, initial_value=initial_value)
[docs]class TrafficLights(LEDBoard):
"""
Extends :class:`LEDBoard` for devices containing red, yellow, and green
LEDs.
The following example initializes a device connected to GPIO pins 2, 3,
and 4, then lights the amber (yellow) LED attached to GPIO 3::
from gpiozero import TrafficLights
traffic = TrafficLights(2, 3, 4)
traffic.amber.on()
:param int red:
The GPIO pin that the red LED is attached to.
:param int amber:
The GPIO pin that the amber LED is attached to.
:param int green:
The GPIO pin that the green LED is attached to.
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances to represent each
LED. If ``False`` (the default), construct regular :class:`LED`
instances.
:param bool initial_value:
If ``False`` (the default), all LEDs will be off initially. If
``None``, each device will be left in whatever state the pin is found
in when configured for output (warning: this can be on). If ``True``,
the device will be switched on initially.
:param int yellow:
The GPIO pin that the yellow LED is attached to. This is merely an
alias for the ``amber`` parameter - you can't specify both ``amber``
and ``yellow``.
"""
def __init__(self, red=None, amber=None, green=None,
pwm=False, initial_value=False, yellow=None):
if amber is not None and yellow is not None:
raise OutputDeviceBadValue(
'Only one of amber or yellow can be specified'
)
devices = OrderedDict((('red', red), ))
self._display_yellow = amber is None and yellow is not None
if self._display_yellow:
devices['yellow'] = yellow
else:
devices['amber'] = amber
devices['green'] = green
if not all(p is not None for p in devices.values()):
raise GPIOPinMissing(
', '.join(devices.keys())+' pins must be provided'
)
super(TrafficLights, self).__init__(
pwm=pwm, initial_value=initial_value,
_order=devices.keys(),
**devices)
def __getattr__(self, name):
if name == 'amber' and self._display_yellow:
name = 'yellow'
elif name == 'yellow' and not self._display_yellow:
name = 'amber'
return super(TrafficLights, self).__getattr__(name)
def __setattr__(self, name, value):
if name == 'amber' and self._display_yellow:
name = 'yellow'
elif name == 'yellow' and not self._display_yellow:
name = 'amber'
return super(TrafficLights, self).__setattr__(name, value)
[docs]class PiTraffic(TrafficLights):
"""
Extends :class:`TrafficLights` for the `Low Voltage Labs PI-TRAFFIC`_:
vertical traffic lights board when attached to GPIO pins 9, 10, and 11.
There's no need to specify the pins if the PI-TRAFFIC is connected to the
default pins (9, 10, 11). The following example turns on the amber LED on
the PI-TRAFFIC::
from gpiozero import PiTraffic
traffic = PiTraffic()
traffic.amber.on()
To use the PI-TRAFFIC board when attached to a non-standard set of pins,
simply use the parent class, :class:`TrafficLights`.
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances to represent each
LED. If ``False`` (the default), construct regular :class:`LED`
instances.
:param bool initial_value:
If ``False`` (the default), all LEDs will be off initially. If
``None``, each device will be left in whatever state the pin is found
in when configured for output (warning: this can be on). If ``True``,
the device will be switched on initially.
.. _Low Voltage Labs PI-TRAFFIC: http://lowvoltagelabs.com/products/pi-traffic/
"""
def __init__(self, pwm=False, initial_value=False):
super(PiTraffic, self).__init__(9, 10, 11,
pwm=pwm, initial_value=initial_value)
[docs]class SnowPi(LEDBoard):
"""
Extends :class:`LEDBoard` for the `Ryanteck SnowPi`_ board.
The SnowPi pins are fixed and therefore there's no need to specify them
when constructing this class. The following example turns on the eyes, sets
the nose pulsing, and the arms blinking::
from gpiozero import SnowPi
snowman = SnowPi(pwm=True)
snowman.eyes.on()
snowman.nose.pulse()
snowman.arms.blink()
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances to represent each
LED. If ``False`` (the default), construct regular :class:`LED`
instances.
:param bool initial_value:
If ``False`` (the default), all LEDs will be off initially. If
``None``, each device will be left in whatever state the pin is found
in when configured for output (warning: this can be on). If ``True``,
the device will be switched on initially.
.. _Ryanteck SnowPi: https://ryanteck.uk/raspberry-pi/114-snowpi-the-gpio-snowman-for-raspberry-pi-0635648608303.html
"""
def __init__(self, pwm=False, initial_value=False):
super(SnowPi, self).__init__(
arms=LEDBoard(
left=LEDBoard(
top=17, middle=18, bottom=22,
pwm=pwm, initial_value=initial_value,
_order=('top', 'middle', 'bottom')),
right=LEDBoard(
top=7, middle=8, bottom=9,
pwm=pwm, initial_value=initial_value,
_order=('top', 'middle', 'bottom')),
_order=('left', 'right')
),
eyes=LEDBoard(
left=23, right=24,
pwm=pwm, initial_value=initial_value,
_order=('left', 'right')
),
nose=25,
pwm=pwm, initial_value=initial_value,
_order=('eyes', 'nose', 'arms')
)
[docs]class TrafficLightsBuzzer(CompositeOutputDevice):
"""
Extends :class:`CompositeOutputDevice` and is a generic class for HATs with
traffic lights, a button and a buzzer.
:param TrafficLights lights:
An instance of :class:`TrafficLights` representing the traffic lights
of the HAT.
:param Buzzer buzzer:
An instance of :class:`Buzzer` representing the buzzer on the HAT.
:param Button button:
An instance of :class:`Button` representing the button on the HAT.
"""
def __init__(self, lights, buzzer, button):
super(TrafficLightsBuzzer, self).__init__(
lights=lights, buzzer=buzzer, button=button,
_order=('lights', 'buzzer', 'button'))
[docs]class FishDish(TrafficLightsBuzzer):
"""
Extends :class:`TrafficLightsBuzzer` for the `Pi Supply FishDish`_: traffic
light LEDs, a button and a buzzer.
The FishDish pins are fixed and therefore there's no need to specify them
when constructing this class. The following example waits for the button
to be pressed on the FishDish, then turns on all the LEDs::
from gpiozero import FishDish
fish = FishDish()
fish.button.wait_for_press()
fish.lights.on()
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances to represent each
LED. If ``False`` (the default), construct regular :class:`LED`
instances.
.. _Pi Supply FishDish: https://www.pi-supply.com/product/fish-dish-raspberry-pi-led-buzzer-board/
"""
def __init__(self, pwm=False):
super(FishDish, self).__init__(
TrafficLights(9, 22, 4, pwm=pwm),
Buzzer(8),
Button(7, pull_up=False),
)
[docs]class TrafficHat(TrafficLightsBuzzer):
"""
Extends :class:`TrafficLightsBuzzer` for the `Ryanteck Traffic HAT`_: traffic
light LEDs, a button and a buzzer.
The Traffic HAT pins are fixed and therefore there's no need to specify
them when constructing this class. The following example waits for the
button to be pressed on the Traffic HAT, then turns on all the LEDs::
from gpiozero import TrafficHat
hat = TrafficHat()
hat.button.wait_for_press()
hat.lights.on()
:param bool pwm:
If ``True``, construct :class:`PWMLED` instances to represent each
LED. If ``False`` (the default), construct regular :class:`LED`
instances.
.. _Ryanteck Traffic HAT: https://ryanteck.uk/hats/1-traffichat-0635648607122.html
"""
def __init__(self, pwm=False):
super(TrafficHat, self).__init__(
TrafficLights(24, 23, 22, pwm=pwm),
Buzzer(5),
Button(25),
)
[docs]class Robot(SourceMixin, CompositeDevice):
"""
Extends :class:`CompositeDevice` to represent a generic dual-motor robot.
This class is constructed with two tuples representing the forward and
backward pins of the left and right controllers respectively. For example,
if the left motor's controller is connected to GPIOs 4 and 14, while the
right motor's controller is connected to GPIOs 17 and 18 then the following
example will drive the robot forward::
from gpiozero import Robot
robot = Robot(left=(4, 14), right=(17, 18))
robot.forward()
:param tuple left:
A tuple of two GPIO pins representing the forward and backward inputs
of the left motor's controller.
:param tuple right:
A tuple of two GPIO pins representing the forward and backward inputs
of the right motor's controller.
"""
def __init__(self, left=None, right=None):
super(Robot, self).__init__(
left_motor=Motor(*left),
right_motor=Motor(*right),
_order=('left_motor', 'right_motor'))
@property
def value(self):
"""
Represents the motion of the robot as a tuple of (left_motor_speed,
right_motor_speed) with ``(-1, -1)`` representing full speed backwards,
``(1, 1)`` representing full speed forwards, and ``(0, 0)``
representing stopped.
"""
return super(Robot, self).value
@value.setter
def value(self, value):
self.left_motor.value, self.right_motor.value = value
[docs] def forward(self, speed=1):
"""
Drive the robot forward by running both motors forward.
:param float speed:
Speed at which to drive the motors, as a value between 0 (stopped)
and 1 (full speed). The default is 1.
"""
self.left_motor.forward(speed)
self.right_motor.forward(speed)
[docs] def backward(self, speed=1):
"""
Drive the robot backward by running both motors backward.
:param float speed:
Speed at which to drive the motors, as a value between 0 (stopped)
and 1 (full speed). The default is 1.
"""
self.left_motor.backward(speed)
self.right_motor.backward(speed)
[docs] def left(self, speed=1):
"""
Make the robot turn left by running the right motor forward and left
motor backward.
:param float speed:
Speed at which to drive the motors, as a value between 0 (stopped)
and 1 (full speed). The default is 1.
"""
self.right_motor.forward(speed)
self.left_motor.backward(speed)
[docs] def right(self, speed=1):
"""
Make the robot turn right by running the left motor forward and right
motor backward.
:param float speed:
Speed at which to drive the motors, as a value between 0 (stopped)
and 1 (full speed). The default is 1.
"""
self.left_motor.forward(speed)
self.right_motor.backward(speed)
[docs] def reverse(self):
"""
Reverse the robot's current motor directions. If the robot is currently
running full speed forward, it will run full speed backward. If the
robot is turning left at half-speed, it will turn right at half-speed.
If the robot is currently stopped it will remain stopped.
"""
self.left_motor.reverse()
self.right_motor.reverse()
[docs] def stop(self):
"""
Stop the robot.
"""
self.left_motor.stop()
self.right_motor.stop()
[docs]class RyanteckRobot(Robot):
"""
Extends :class:`Robot` for the `Ryanteck MCB`_ robot.
The Ryanteck MCB pins are fixed and therefore there's no need to specify
them when constructing this class. The following example drives the robot
forward::
from gpiozero import RyanteckRobot
robot = RyanteckRobot()
robot.forward()
.. _Ryanteck MCB: https://ryanteck.uk/add-ons/6-ryanteck-rpi-motor-controller-board-0635648607160.html
"""
def __init__(self):
super(RyanteckRobot, self).__init__((17, 18), (22, 23))
[docs]class CamJamKitRobot(Robot):
"""
Extends :class:`Robot` for the `CamJam #3 EduKit`_ robot controller.
The CamJam robot controller pins are fixed and therefore there's no need
to specify them when constructing this class. The following example drives
the robot forward::
from gpiozero import CamJamKitRobot
robot = CamJamKitRobot()
robot.forward()
.. _CamJam #3 EduKit: http://camjam.me/?page_id=1035
"""
def __init__(self):
super(CamJamKitRobot, self).__init__((9, 10), (7, 8))
class _EnergenieMaster(SharedMixin, CompositeOutputDevice):
def __init__(self):
self._lock = Lock()
super(_EnergenieMaster, self).__init__(
*(OutputDevice(pin) for pin in (17, 22, 23, 27)),
mode=OutputDevice(24), enable=OutputDevice(25),
_order=('mode', 'enable'))
def close(self):
if self._lock:
with self._lock:
super(_EnergenieMaster, self).close()
self._lock = None
@classmethod
def _shared_key(cls):
# There's only one Energenie master
return None
def transmit(self, socket, enable):
with self._lock:
try:
code = (8 * bool(enable)) + (8 - socket)
for bit in self[:4]:
bit.value = (code & 1)
code >>= 1
sleep(0.1)
self.enable.on()
sleep(0.25)
finally:
self.enable.off()
[docs]class Energenie(SourceMixin, Device):
"""
Extends :class:`Device` to represent an `Energenie socket`_ controller.
This class is constructed with a socket number and an optional initial
state (defaults to ``False``, meaning off). Instances of this class can
be used to switch peripherals on and off. For example::
from gpiozero import Energenie
lamp = Energenie(1)
lamp.on()
:param int socket:
Which socket this instance should control. This is an integer number
between 1 and 4.
:param bool initial_value:
The initial state of the socket. As Energenie sockets provide no
means of reading their state, you must provide an initial state for
the socket, which will be set upon construction. This defaults to
``False`` which will switch the socket off.
.. _Energenie socket: https://energenie4u.co.uk/index.php/catalogue/product/ENER002-2PI
"""
def __init__(self, socket=None, initial_value=False):
if socket is None:
raise EnergenieSocketMissing('socket number must be provided')
if not (1 <= socket <= 4):
raise EnergenieBadSocket('socket number must be between 1 and 4')
self._value = None
super(Energenie, self).__init__()
self._socket = socket
self._master = _EnergenieMaster()
if initial_value:
self.on()
else:
self.off()
[docs] def close(self):
if self._master:
m = self._master
self._master = None
m.close()
@property
def closed(self):
return self._master is None
def __repr__(self):
try:
self._check_open()
return "<gpiozero.Energenie object on socket %d>" % self._socket
except DeviceClosed:
return "<gpiozero.Energenie object closed>"
@property
def value(self):
return self._value
@value.setter
def value(self, value):
value = bool(value)
self._master.transmit(self._socket, value)
self._value = value
def on(self):
self.value = True
def off(self):
self.value = False